The FI-1000 Fibre Inspection Camera enables the inspection and pass/fail certification of fibre end-faces required under IEC61300-3-35. Used with either the Fluke Certibre Pro Quad or the Fluke Certifibre Pro Multimode, both of which are also available from TechRentals, a visual display of the end-face is shown. Results can be stored and professional reports produced using the Linkware management software supplied. Contamination is the No 1 source of problems in optical networks and use of this camera is recommended to ensure optimum performance of the network.
- Suitable for all singlemode and multimode applications
- Supplied with SC, LC, ST and APC connector tips
- Powered from the Certifibre
Cleaning Kit is supplied to use when the fibre end face or port does not pass certification. After cleaning test the fibre end face or port again with the camera and repeat cleaning until it passes. Kit includes:
- Fiber optic cassette cleaner
- Pre-saturated wipes
- Fibre End face and Port Cleaner (Ferrule) - 1.25mm
- Fibre End face and Port Cleaner (Ferrule) - 2.5mm