To state the obvious, calibrated instruments are a basic business requirement to provide certainty of results. Hindsight often teaches us that we should have made that decision so why take the risk. At TechRentals all our pressure gauges and temperature/IR meters are calibrated. Call our experienced Application Engineers on 0800 832 475 and we can assist you in selecting the right equipment for your specific requirements.
Featured Products
Crystal XP2i Digital Gauge/Logger—30Bar
Two tools in one; high accuracy pressure gauge and logger. 30Bar capacity
Recording intervals: 1s to 8h. Logs up to 3000 pressure measurements
Intrinsically safe. Battery powered. IANZ calibration
Fluke 52 Digital Thermometer
Type K, two channel thermometer with 3 probes supplied
Insertion probes calibrated temperature range: -20°C to 1000°C
Surface contact probe, operating range:- 200°C to 700°C
Fluke 1523 Precision Handheld Thermometer
Precision laboratory reference thermometer including a 6.4mm x 305mm probe
Temperature Range: -30°C to 420°C
Calibrated in the –30°C to 420°C range
Druck 400Bar Hydraulic Pressure Calibrator
Pressure Range: 0 to 400Bar. Accuracy ±0.025FS
Calibrate your instruments against this NATA certified unit
Pressure pump and fine screw adjustment
Our extensive range of products also includes:
Crystal XP2i Digital Gauge/Logger – 140Bar
- Same specifications as for above 30Bar logger, except 140Bar pressure
Crystal XP2i Digital Gauge/Logger – 700Bar
- Same specifications as for above 30Bar logger, except 700Bar pressure
Fluke 572-2 Infrared Thermometer
- Non-contact digital thermometer. Temper range: -30º to 900ºC. Target size: 1/60 of distance, minimum target Ø19mm.
Druck DPI603 2 Bar Pressure Calibrator
- Pressure Range: 0 to 2Bar. Accuracy ±0.075fs. Portable
Druck DPI603 20 Bar Pressure Calibrator
- Pressure Range: 0 to 20Bar. Accuracy ±0.075fs. Portable
Endress & Hauser 40 and 100 Bar Transducers
- Pressure transducers with flushable diaphragm. Accuracy: 0.5% of FS. Temperature: -25° to 70ºC. We can calibrate this transducer together with your/our instrument if required
Hart/Fluke Dry Block Temperature Calibrators
- 2 models covering temperature range -25°C to 650°C. Use in our conjunction with Fluke 52 or Fluke 1523 calibrated thermometers as above