Rental Product Catalogue

All Products > Electrical Power > Thermal.Imaging Cameras

Thermal.Imaging Cameras

Flir E86 Thermal Imager / Infrared Camera Flir E86 Thermal Imager / Infrared Camera FLI.E86
Flir E95 Thermal Imager / Infrared Camera Flir E95 Thermal Imager / Infrared Camera FLI.E95
Fluke Ti480 Thermal Imager / Infrared Camera Fluke Ti480 Thermal Imager / Infrared Camera FLU.Ti480
1–3 of 3 products

Several thermal imager (aka infrared cameras) are available for displaying and capturing surface temperature of objects. Individual specifications are shown below.


  • 9.1cm colour display
  • Detector type: 320 x 240 focal plane array, uncooled microbolometer
  • Accuracy ±2°C or 2% (whichever is greater)
  • Thermal sensitivity (NETD): ≤ 0.05°C at 30°C (50 mK)
  • Infrared spectral band: 7.5µm to 14µm
  • IR-Fusion® information: Control over IR and visual light blending and/or Picture in Picture
  • 60 seconds maximum voice recording time per image
  • 2GB SD memory card (store up to 1200 files)
  • Fast charging LiIon batteries will last the day
  • Fluke SmartView software for analysing images and creating Reports

  • Why TechRentals® offer high spec thermal imagers ... QUALITY PAYS OFF

High resolution, high thermal sensitivity and adjustable emissivity allows the greatest possible detection of potential warning signs. Collects up to 307,200 readings simultaneously, colour coded and presented in one image - nine times a second!


  • High Thermal Sensitivity; 0.05°C detects very fine temperature variations

  • Adjustable span; as low as 2°C allows the spectrum of colours to be spread over just 2°C

  • High Resolution; up to 307,200 sensors reduces the ‘averaging’ a thermal imager must do ensures small heat sources are represented as accurately as large areas allows you to stand further from the target Outstanding clarity to images sets you apart from the competition the days of single spot measurement are over

  • Adjustable emissivity tune the instrument to the material to ensure the temperature you read is representative

  • IR-Fusion control of the blend of visual light and infrared energy

  • Fluke’s SmartView software makes analysis and report generation powerful yet painless Allows you to alter almost every aspect of the image retrospectively – a life-saver for images that can’t be repeated

  • Robust design, and Fluke dependability and ease of use

  • Technical support available and try them out at our office before use

WHATEVER YOUR THERMAL IMAGING NEED WE HAVE A CAMERA FOR YOU ... ... Commissioning, Preventative maintenance, Predictive maintenance, Fault-finding, Energy auditing, Weatherproofing

Call our Application Engineers on 0800 832 475 for fast, reliable service and advice