The A 1732 DC EVSE Adapter is a specialised tool for electrical safety and functional testing of Electric Vehicle Supply Equipment in both Mode 4 (DC EVSE) and Mode 3 (AC EVSE) configurations. Supports connector types - CCS2, CHAdeMO, and Type 2 AC plugs. The A 1732 adapter enables initiation when paired with MI 3155 of communication protocols, such as CHAdeMO, and Low-level PWM, and it can also simulate errors on the Control Pilot (CP) signal and Protective Earth (PE) connections to assess EVSE response. When paired with the MI 3155 EurotestXD installation tester, the A 1732 DC EVSE Adapter can be used to log the charging protocol, perform measurements and testing required for EVSE commissioning and for periodic safety testing. This device is equipped for advanced diagnostics including 4-wire connection tests, IMD - Insulation monitoring device test to ensure every charger meets higher safety standards. Widely used applications – EVSE installations and commissioning, Periodic testing, Troubleshooting faulty EVSE.
- Fault simulation on CCS2 and Type 2 for CP open, PE open and CP short.
- Fault simulation on CHAdeMO for CP3 open, PE open and CAN stop.
- Banana test points for DC, AC and PE terminals.
- Double PE test terminals (PE(C) and PE(P)) for a true 4-wire Rlow measurement.
- Bluetooth communication with MI 3155 EurotestXD.
- 4-wire measurements with 200 mA measuring current.