Several thermal imagers (aka infrared cameras) are available for displaying and
capturing surface temperature of objects. Individual specifications are shown below.
COMMON FEATURES FOR ALL OUR THERMAL CAMERAS
- 9.1cm colour display
- Detector type: 320 x 240 focal plane array, uncooled microbolometer
- Accuracy ±2°C or 2% (whichever is greater)
- Thermal sensitivity (NETD): ≤ 0.05°C at 30°C (50 mK)
- Infrared spectral band: 7.5µm to 14µm
- IR-Fusion® information: Control over IR and visual light blending and/or Picture in Picture
- 60 seconds maximum voice recording time per image
- 2GB SD memory card (store up to 1200 files)
- Fast charging LiIon batteries will last the day
- Fluke SmartView software for analysing images and creating Reports
Why TechRentals® offer high spec thermal imagers ... QUALITY PAYS OFF
High resolution, high thermal sensitivity and adjustable emissivity allows the greatest possible detection of potential warning signs. Collects up to 76000 readings simultaneously, colour coded and presented in one image - nine times a second!
KEY FEATURES OF OUR FLUKE THERMAL CAMERAS:
High Thermal Sensitivity; 0.05°C
detects very fine temperature
variations
Adjustable span; as low as 2°C
allows the spectrum of colours to
be spread over just 2°C
High Resolution; up to 76,800 sensors
reduces the ‘averaging’ a thermal
imager must do
ensures small heat sources are
represented as accurately as large
areas
allows you to stand further from
the target
Outstanding clarity to images sets
you apart from the competition
the days of single spot
measurement are over
Adjustable emissivity
tune the instrument to the material
to ensure the temperature you
read is representative
IR-Fusion
control of the blend of visual light
and infrared energy
Fluke’s SmartView software
makes analysis and report
generation powerful yet painless
Allows you to alter almost
every aspect of the image
retrospectively – a life-saver for
images that can’t be repeated
Robust design, and Fluke
dependability and ease of use
Technical support available and try
them out at our office before use
WHATEVER YOUR THERMAL IMAGING NEED WE HAVE
A CAMERA FOR YOU ...
... Commissioning, Preventative maintenance, Predictive maintenance,
Fault-finding, Energy auditing, Weatherproofing
Contact our experienced Application Engineers to assist you select the right thermal camera for your application on 0800 832475. Rent from as little as one day to as long as you require.
All our thermal imagers are available nationwide via overnight courier or can be collected from our Penrose, Auckland offices.